描述
2. Specification
Packaging
⚫ Raspberry PI 4B 4G x 1
⚫ MLC Micro SD card 32G x 1
⚫ 220v Power cord 1.5m x 1
Features
• Size: 134mm (W) x 107mm (L) x 73mm (H)
• Operating current: 5mA Idle, 100mA Working
• Operating voltage: 5VDC
• Operating Temperature: -30 ~ +70°C
• Operating Humidity: 20 to 85% RH
• External Raspberry PI 4B Mount (GPIO 3.3vdc)
4Ch Photocoupler Isolation
• Signal Isolation Input and Output level converting
• Operating voltage: Input: 24VDC / Output: 3.3VDC
• 80kHz Conversion frequency
• Reverse-polarity protection
• Optional common ground
1Ch Relay
• Arrangement: 1 From C, 10A
• Contact rating:
◆ From A : 10A/125VAC, 5A/250VAC, 5A/30VDC
◆ From B : 3A/125VAC, 2A/250VAC, 1A/30VDC
• Mechanical life: min. 107(10 million) / at 180 times/min
• Timing:
◆ Operate: Max 20ms
◆ Release: Max 20ms
Power Module
• Universal AC Input (85 ~ 264VAC) / Full range
• Efficiency: 79%
• Protections:
◆ Short circuit
◆ Overload(115% ~ 160% rated output power)
◆ Over voltage
• Isolation class II
• Output DC Voltage: 5VDC
• Rated current: 4A/20W
3. Application Pinouts
Operation Channel Pull Normal State Rpi 4B Pin#
Signal Inputs Channel #1 Down LOW 11 (GPIO17)
Channel #2 Down LOW 13 (GPIO27)
Channel #3 Down LOW 15 (GPIO22)
Channel #4 Down LOW 16 (GPIO23)
Relay Outputs Channel #1 Hi-Z LOW 18 (GPIO24)
* Remarks
- This device has external pull-down registers for signal input ports. So, there is no need to use RPI internal pull-up/pull-down register.
Packaging
⚫ Raspberry PI 4B 4G x 1
⚫ MLC Micro SD card 32G x 1
⚫ 220v Power cord 1.5m x 1
Features
• Size: 134mm (W) x 107mm (L) x 73mm (H)
• Operating current: 5mA Idle, 100mA Working
• Operating voltage: 5VDC
• Operating Temperature: -30 ~ +70°C
• Operating Humidity: 20 to 85% RH
• External Raspberry PI 4B Mount (GPIO 3.3vdc)
4Ch Photocoupler Isolation
• Signal Isolation Input and Output level converting
• Operating voltage: Input: 24VDC / Output: 3.3VDC
• 80kHz Conversion frequency
• Reverse-polarity protection
• Optional common ground
1Ch Relay
• Arrangement: 1 From C, 10A
• Contact rating:
◆ From A : 10A/125VAC, 5A/250VAC, 5A/30VDC
◆ From B : 3A/125VAC, 2A/250VAC, 1A/30VDC
• Mechanical life: min. 107(10 million) / at 180 times/min
• Timing:
◆ Operate: Max 20ms
◆ Release: Max 20ms
Power Module
• Universal AC Input (85 ~ 264VAC) / Full range
• Efficiency: 79%
• Protections:
◆ Short circuit
◆ Overload(115% ~ 160% rated output power)
◆ Over voltage
• Isolation class II
• Output DC Voltage: 5VDC
• Rated current: 4A/20W
3. Application Pinouts
Operation Channel Pull Normal State Rpi 4B Pin#
Signal Inputs Channel #1 Down LOW 11 (GPIO17)
Channel #2 Down LOW 13 (GPIO27)
Channel #3 Down LOW 15 (GPIO22)
Channel #4 Down LOW 16 (GPIO23)
Relay Outputs Channel #1 Hi-Z LOW 18 (GPIO24)
* Remarks
- This device has external pull-down registers for signal input ports. So, there is no need to use RPI internal pull-up/pull-down register.